Komplett Elpelare 300mm slag

Artikel: WATWAT230
Lagersaldo: 0 st

Vid 0 i lager kan denna produkt ha en leveranstid på upp till 2-4 veckor.

Kort beskrivning:

Komplett elpelare/elhess som tål 100kg.
300mm slaglängd.
Manöverpanel, adapterplattor, strömkablage och fästskruvar medföljer.
Kompatibel med H-fot.
Se övriga produktbilder för mått etc.

Data från tillverkare:
• Thrust: up to 2500 N per DL2
• Speed: up to 20 mm/s with CBD4/CBD6S
• Various installation dimensions
• Stroke length 300 mm, 350 mm, 500 mm ± 4 mm
• Colour: Natural anodized aluminium profiles and
black painted end plates or electro-galvanised
3 mm end plates
• Low noise level
• Compact and mounting friendly design
• Built-in limit switches (not adjustable)
• Dimension column: 147 x 194 mm
• Dimension 8 mm end plates: 160 x 244 x 8 mm
• Dimension 3 mm end plates: flush with the
profiles
• Each column is fi tted with a 740 mm ± 60 mm
straight black cable with an 8-pole AMP plug or
100 mm mini-fit cable
• Dynamic bending moment (at 100% stroke length):
My+/Mx+ = 250 Nm and My-/Mx- = 200 Nm
Options:
• Mounting bracket (order number 0578006)
• CBD6S mounted inside the DL2
Usage:
• Single drive or parallel drive
• Duty cycle: Max. 5% ~ 1 min./19 min., max. 1 min.
at continuous use followed by 19 min. pause
• Ambient temperature: +5 °C to +40 °C
• Storage and transport temperature:
-20 °C to +70 °C
• Approved according to EN60335-1
• Will be approved according to UL962 with CBD6S

WATWAT230.png WATWAT230 ritning.pngWATWAT230 bild.jpg